D Link Dwr 116 User Manual

Posted By admin On 13.12.19
  1. D-link Dwr 116
  2. D-link Dwr 922
  3. D Link Dwr 116 Manual
  4. D-link Dwr-116 Manuale Italiano
  5. D-link Dwr 961 Specs

D-Link is a world leader in networking hardware manufacturing. Information about our award winning Fast Ethernet Network Adapters, Hubs, Switches, Network Kits, and USB products. Manual D-Link DWR-116. View the D-Link DWR-116 manual for free or ask your question to other D-Link DWR-116 owners.

Section 3 - Configuration 47 TimeThis section will help you set the time zone that you are in andthe NTP (Network Time Protocol) server. Daylight Saving can alsobe configured to adjust the time when needed. Time: Displays the current time and date of the DWR-116. Time Zone: Select the appropriate Time Zone from the drop-down box. Automatically Select this checkbox to automatically synchronize synchronize the DWR-116 with an Internet with Internet time server. time server: NTP Server Choose the NTP Server used for synchronizing Used: time and date. Sync. Result: Shows the result of the last time synchronization. Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.D-Link DWR-116 User Manual


Section 3 - Configuration SyslogThe DWR-116 keeps a running log of events and activitiesoccurring on the router. You may send these logs to a SysLogserver on your network. Enable Logging Select this box to send the router logs to ato Syslog Server: Syslog server.Syslog Server IP Enter the address of the Syslog server that will Address: be used to send the logs. Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.D-Link DWR-116 User Manual 48


Section 3 - Configuration 49 Email SettingsEmail Settings allows you to send the system log files, router alertmessages, and firmware update notifications to an e-mail address. Enable E-mail When this option is enabled, router activity Notification: logs are e-mailed to a designated e-mail address. SMTP Sever IP Enter the SMTP server IP address followed and Port: by a colon and the port number (e.g. 123.123.123.1:25). SMTP Enter the SMTP username. Username:SMTP Password: Enter the SMTP password. Send E-mail Enter the e-mail address where you would like Alert to: the e-mail sent to. E-mail Subject: Enter a subject for the e-mail.E-mail Log Now: Click this button to access the e-mail log. Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.D-Link DWR-116 User Manual


Section 3 - Configuration 50 SystemHere, you can save the current system settings onto the localhard drive. Save Settings Use this option to save your current router To Local Hard configuration settings to a file and onto your Drive: computer. Click Save to open a file dialog, and then select a location and file name for the settings. Load Settings Use this option to load the previously savedFrom Local Hard router configuration settings. Browse to find Drive: the saved file and then click Upload Settings to transfer those settings to the router. Restore To This option will restore all settings back to Factory Default their defaults. Any settings that have not been Settings: backed up will be lost, including any rules that you have created.D-Link DWR-116 User Manual


Section 3 - Configuration 51 FirmwareHere, you can upgrade the firmware of your router. Make surethe firmware you want to use is on the local hard drive of thecomputer and then click Browse to upload the file. Please checkthe D-Link support site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your harddrive from the D-Link support site. Current Displays your current firmware version. Firmware Version: Current Displays your current firmware date. Firmware Date: Browse: After you have downloaded the new firmware, click Browse to locate the firmware on your computer. Tick Accept unofficial firmware if you want to update the DWR-116 with unofficial firmware (not recommended). Click Upload to start the firmware upgrade.D-Link DWR-116 User Manual


Section 3 - Configuration 52 Dynamic DNSThe Dynamic Domain Name System (DDNS) feature allows youto host a server (Web, FTP, or Game Server) using a domain namethat you have purchased (www.whateveryournameis.com) withyour dynamically assigned IP address.Sign up for D-Link’s free DDNS service at www.dlinkddns.com. Enable DDNS: DDNS is a method of keeping a domain name linked to a changing IP Address. Select this box to enable DDNS. Provider: Select your DDNS provider from the drop- down box. Host Name: Enter the Host Name that you registered with your DDNS service provider. Username / Enter the Username for your DDNS account. E-mail: Password / Key: Enter the Password for your DDNS account. Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.D-Link DWR-116 User Manual


Section 3 - Configuration System CheckThis useful diagnostic utility can be used to check if a computeris connected to the network. It sends ping packets and listens forresponses from the specific host.Host Name or IP Enter a host name or the IP address that you Address: want to ping and click Ping. PING Result: The status of your Ping attempt will be displayed in the Ping Result box.D-Link DWR-116 User Manual 53


Section 3 - Configuration 54 SchedulesThis section allows you to manage schedule rules for variousfirewall and parental control features. Enable Tick this check box to enable schedules. Schedule:Add New Rule..: Click on this button to create a new rule. The following options will be available. Edit: Edit the rule’s start and end time. Delete: Delete the rule. Name of Rule 1: Enter a name for your new schedule. Start Time Enter the time at which you would like the (hh:mm): schedule to become active. End Time Select the time at which you would like the (hh:mm): schedule to become inactive. Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.D-Link DWR-116 User Manual


Section 3 - Configuration Status Device InformationAll of your Internet and network connection details are displayed onthis page. The firmware version is also displayed here. General: Displays the current time and firmware version. WAN: Displays the MAC address and the private (local) IP settings for the router.3G/4G LTE Card: Displays 3G/4G LTE card info, link status, and the LAN: network name. Wireless LAN: Displays the MAC address and the public IP settings for the router.LAN Computers: Displays the wireless MAC address and your wireless settings such as SSID, channel, and encryption type. Also displays the list of currently connected DHCP clients.D-Link DWR-116 User Manual 55


Section 3 - Configuration LogsHere you can view logs and define events that you want to view.This router also has an internal syslog server, so you can send thelog files to a computer that is running a syslog utility.D-Link DWR-116 User Manual 56


Section 3 - Configuration StatisticsHere you can view the packets transmitted and received passingthrough your router on both WAN and LAN ports. The trafficcounter will reset if the device is rebooted.D-Link DWR-116 User Manual 57


Section 3 - Configuration WirelessThis table displays a list of wireless clients that are connected toyour wireless router. It also displays the connection time andMAC address of the connected wireless clients.D-Link DWR-116 User Manual 58


Section 3 - Configuration SupportThe SUPPORT pages provide help information for each sectionof the device’s interface. To view the Support pages, click onSUPPORT at the top of the screen.D-Link DWR-116 User Manual 59


Section 4 - Security Wireless SecurityThis section will show you the different levels of security you can use to protect your data from intruders. TheDWR-116 offers the following types of security:• WPA2 (Wi-Fi Protected Access 2) • WPA2-PSK (Pre-Shared Key)• WPA (Wi-Fi Protected Access) • WPA-PSK (Pre-Shared Key)• WEP (Wired Equivalent Privacy) What is WEP?WEP stands for Wired Equivalent Privacy. It is based on the IEEE 802.11 standard and uses the RC4 encryption algorithm. WEP provides security byencrypting data over your wireless network so that it is protected as it is transmitted from one wireless device to another.To gain access to a WEP network, you must know the key. The key is a string of characters that you create. When using WEP, you must determinethe level of encryption. The type of encryption determines the key length. 128-bit encryption requires a longer key than 64-bit encryption. Keysare defined by entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American Standard Code for Information Interchange– alphanumeric characters) format. ASCII format is provided so you can enter a string that is easier to remember. The ASCII string is converted toHEX for use over the network. Four keys can be defined so that you can change keys easily.D-Link DWR-116 User Manual 60


Section 4 - Security Configure WEPIt is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity beforeenabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on Wireless Settings on the left side.2. Next to Security Mode, select Enable WEP Security.3. Next to Authentication, select Open or Shared Key.4. Select either 64-bit or 128-bit encryption from the drop-down box next to WEP Encryption.5. Next to Key Type, select either Hex or ASCII. Hex (recommended) - Letters A-F and numbers 0-9 are valid. ASCII - All numbers and letters are valid.6. Next to Key 1, enter a WEP key that you create. Make sure you enter this key exactly on all your wireless devices. You may enter up to 4 different keys.7. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the router.D-Link DWR-116 User Manual 61


Section 4 - Security What is WPA?WPA, or Wi-Fi Protected Access, is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy).The 2 major improvements over WEP: • Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing algorithm and, by adding an integrity-checking feature, ensures that the keys haven’t been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP. • User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates access to a wireless network based on a computer’s hardware-specific MAC address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network.WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router oraccess point.WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryptionsystem to ensure that only authorized network users can access the network.D-Link DWR-116 User Manual 62


Section 4 - Security Configure WPA-PSKIt is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity beforeenabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on Wireless Settings on the left side.2. Next to Security Mode, select Enable WPA-Personal Security or Enable WPA2-Personal Security.3. Next to Cipher Mode, select TKIP, AES, or Auto.4. Next to PSK/EAP, select PSK.5. Next to Passphrase, enter a key (passphrase). The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. Make sure you enter this key exactly the same on all other wireless clients.6. Enter the passphrase again next to Confirmed Passphrase.7. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WPA-PSK (or WPA2-PSK) on your adapter and enter the same passphrase as you did on the router.D-Link DWR-116 User Manual 63


Section 4 - Security Configure WPA (RADIUS)It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity beforeenabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on Wireless Settings on the left side.2. Next to Security Mode, select Enable WPA-Personal Security or Enable WPA2-Personal Security.3. Next to Cipher Mode, select TKIP, AES, or Auto.4. Next to PSK/EAP, select EAP.5. Next to RADIUS Server 1 enter the IP Address of your RADIUS server.6. Next to Port, enter the port you are using with your RADIUS server. 1812 is the default port.7. Next to Shared Secret, enter the security key.8. If you have a secondary RADIUS server, enter its IP address, port, and secret key.9. Click Apply Settings to save your settings.D-Link DWR-116 User Manual 64


Section 4 - Security Windows® 8 WPA/WPA2It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring yourwireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used.To join an existing network, locate the wireless network icon in the taskbar, next to the Wireless Icontime display.Clicking on this icon will display a list of wireless networks which are within connectingproximity of your computer. Select the desired network by clicking on the network name.D-Link DWR-116 User Manual 65


Section 4 - SecurityYou will then be prompted to enter the network security key (Wi-Fi password) forthe wireless network. Enter the password into the box and click Next.If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can alsopress the WPS button on your router at this point to enable the WPS function.When you have established a successful connection with a wireless network, the wordConnected will appear next to the name of the network to which you are connected.D-Link DWR-116 User Manual 66


Section 4 - Security Windows® 7 WPA/WPA2It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring yourwireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon2. The utility will display any available wireless networks in your area.D-Link DWR-116 User Manual 67


Section 4 - Security 683. Highlight the wireless connection with Wi-Fi name (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.4. The following window appears while your computer tries to connect to the router.5. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. You can also connect by pushing the WPS button on the router.It may take 20-30 seconds to connect to the wireless network. If theconnection fails, please verify that the security settings are correct. Thekey or passphrase must be exactly the same as on the wireless router.D-Link DWR-116 User Manual

Flux™ enables super smooth ultra slow-motion and fast-motion speed changes. Gopro studio 2.5 user manual for mac


Section 4 - Security WPSThe WPS feature of the DWR-116 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 toconfigure the WPS feature:1. Click the Start button and select Computer from the Start menu.2. Click Network on the left side.D-Link DWR-116 User Manual 69


Section 4 - Security 703. Double-click the DWR-1164. Input the WPS PIN number (displayed in the WPS window on the Router’s LCD screen or in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next.D-Link DWR-116 User Manual


Section 4 - Security 715. Type a name to identify the network.6. To configure advanced settings, click the icon.Click Next to continue.D-Link DWR-116 User Manual

It offers the flexibility to use some of those outputs for a second and third zone, bi-amping your front speakers, or an extra set of Front speakers (Front B).Once you set up the power amp assignments, the receiver can handle the rest using its Intelligent Amp Assign. Speaker patterns take YPAO to the next levelAfter configuring the power amp assign for two-zone playback, I ran Yamaha’s speaker calibration system, known as YPAO, with the included microphone. Yamaha rx a1020 manual. For instance, if you have a 9.2-channel system set up in the main zone and stereo speakers in Zone 2, the receiver automatically knows to switch the power amp from the “front presence” speakers in Zone 1 to the stereo speakers in Zone 2.


Section 4 - Security 727. The following window appears while the Router is being configured. Wait for the configuration to complete.8. The following window informs you that WPS on the router has been setup successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future.9. Click Close to complete WPS setup.D-Link DWR-116 User Manual


Section 5 - Connecting to a Wireless Network Windows Vista®Windows Vista® users may use the built-in wireless utility. If you are using another company’s utility, please refer to the usermanual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” optionsimilar to the Windows Vista® utility as seen below.If you receive the Wireless Networks Detected bubble, click on thecenter of the bubble to access the utility. orRight-click on the wireless computer icon in your system tray (lower-rightcorner next to the time). Select Connect to a network.The utility will display any available wireless networks in your area. Clickon a network (displayed using the SSID) and click the Connect button.If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basicssection in this manual for more information.D-Link DWR-116 User Manual 73


Section 5 - Connecting to a Wireless Network WPA/WPA2It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring yourwireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network.2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect.D-Link DWR-116 User Manual 74


Section 5 - Connecting to a Wireless Network3. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect.It may take 20-30 seconds to connect to the wireless network. If theconnection fails, please verify that the security settings are correct. Thekey or passphrase must be exactly the same as on the wireless router.D-Link DWR-116 User Manual 75


Section 5 - Connecting to a Wireless Network WPS/WCN 2.0The router supports Wi-Fi protection, referred to as WCN 2.0 in Windows Vista®. The following instructions for setting this updepends on whether you are using Windows Vista® to configure the router or third party software.When you first set up the router, Wi-Fi protection is disabled and not configured. To enjoy the benefits of Wi-Fi protection, therouter must be both enabled and configured. There are three basic methods to accomplish this: use Windows Vista’s built-insupport for WCN 2.0, use software provided by a third party, or manually configure.If you are running Windows Vista®, log into the router and click the Enable checkbox in the Basic > Wireless section. Use theCurrent PIN that is displayed on the Advanced > Wi-Fi Protected Setup section or choose to click the Generate New PINbutton or Reset PIN to Default button.If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceedto the next section to set up the newly-configured router.D-Link DWR-116 User Manual 76


Section 5 - Connecting to a Wireless Network Windows® XPWindows® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for ServicePack 2 users. If you are using another company’s utility, please refer to the user manual of your wireless adapter for help withconnecting to a wireless network. Most utilities will have a“site survey”option similar to the Windows® XP utility as seen below.If you receive the Wireless Networks Detected bubble, click on thecenter of the bubble to access the utility. orRight-click on the wireless computer icon in your system tray (lower-rightcorner next to the time). Select View Available Wireless Networks.The utility will display any available wireless networks in your area. Clickon a Wi-Fi network (displayed using the SSID) and click the Connectbutton.If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basicssection in this manual for more information.D-Link DWR-116 User Manual 77


Section 5 - Connecting to a Wireless Network WPA/WPA2It is recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you arejoining an existing network, you will need to know the WPA key being used.1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks.2. Highlight the Wi-Fi network (SSID) you would like to connect to and click Connect.D-Link DWR-116 User Manual 78


Section 5 - Connecting to a Wireless Network3. The Wireless Network Connection box will appear. Enter the WPA-PSK Wi-Fi password and click Connect.It may take 20-30 seconds to connect to the wireless network. If theconnection fails, please verify that the WPA-PSK settings are correct. TheWi-Fi password must be exactly the same as on the wireless router.D-Link DWR-116 User Manual 79


Section 6 - Troubleshooting TroubleshootingThis chapter provides solutions to problems that can occur during the installation and operation of the DWR-116. Read the following descriptionsif you are having problems. (The examples below are illustrated in Windows® XP. If you have a different operating system, the screenshots on yourcomputer will look similar to the following examples.)1. Why can’t I access the web-based configuration utility?When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website on the Internet or have to beconnected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet toconnect to the web-based utility.• Make sure you have an updated Java-enabled web browser. We recommend the following: • Internet Explorer 6.0 or higher • Netscape 8 or higher • Mozilla 1.7.12 (5.0) or higher • Opera 8.5 or higher • Safari 1.2 or higher (with Java 1.3.1 or higher) • Camino 0.8.4 or higher • Firefox 1.5 or higher• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on.• Disable any internet security software running on the computer. Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows® XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it.D-Link DWR-116 User Manual 80


Section 6 - Troubleshooting• Configure your Internet settings: • Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. • Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. • Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times. • Close your web browser (if open) and open it.• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your the web management.• If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer.2. What can I do if I forgot my password?If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the factory defaults.To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the buttondown for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The defaultIP address is 192.168.0.1. When logging in, the username is admin and leave the password box empty.D-Link DWR-116 User Manual 81


Appendix A - Wireless Basics Wireless ModesThere are basically two modes of networking: • Infrastructure – All wireless clients will connect to an access point or wireless router. • Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more WNA-2330 wireless network Cardbus adapters.An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or accesspoint.An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate.D-Link DWR-116 User Manual 82


Appendix B - Networking Basics Networking BasicsCheck your IP addressAfter you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wirelessrouter) automatically. To verify your IP address, please follow the steps below.Click on Start > Run. In the run box type cmd and click OK. (Windows® Vista™ users type cmd in the Start Search box.)At the prompt, type ipconfig and press Enter.This will display the IP address, subnet mask, and the defaultgateway of your adapter.If the address is 0.0.0.0, check your adapter installation, securitysettings, and the settings on your router. Some firewall softwareprograms may block a DHCP request on newly installedadapters.D-Link DWR-116 User Manual 83


Appendix B - Networking BasicsStatically Assign an IP addressIf you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:Step 1Windows® Vista™ - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections.Windows® XP - Click on Start > Control Panel > Network Connections.Windows® 2000 - From the desktop, right-click My Network Places > Properties.Step 2Right-click on the Local Area Connection which represents your network adapter and select Properties.Step 3Highlight Internet Protocol (TCP/IP) and click Properties.Step 4Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router.Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that thenumber you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1).Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server fromyour ISP.Step 5Click OK twice to save your settings.D-Link DWR-116 User Manual 84


Appendix C - Technical Specifications Technical SpecificationsData Rates ** Antenna300,150,135,120,90,60,45,30,15 Mbps in 802.11n mode 2 x External 5 dBiWi-Fi antenna6/9/11/12/18/24/36/48/54Mbps in 802.11g mode1/2/5.5/11Mbps in 802.11b mode LED Status IndicatorsStandards 3G / 4G LTE WANIEEE 802.11n compliant (2Tx2R) Wi-FiIEEE 802.11b/g LAN 1, LAN 2, LAN 3, LAN 4IEEE 802.3IEEE 802.3u PowerFrequency External 5 V DC 2 A power adapter2.4 - 2.4835 GHz Dimensions (L x W x H)Wireless Security • 148.5 x 113.5 x 25 mm (5.85 x 4.47 x .98 inches)64/128-bit WEP (Wired Equivalent Privacy) Operating TemperatureWPA & WPA2 (Wi-Fi Protected Access) Operating: 0 to 40 °C (32 to 104 °F)Firewall Operating HumidityIP Filtering Operating: 10% to 95% non-condensingNetwork Address Translation (NAT)MAC FilteringVPNL2TP/PPTP/IPSEC VPN Pass-throughPorts4 x LAN (RJ-45)1x WAN1 x USBD-Link DWR-116 User Manual 85